Airing and/or cleans the system fluid

Lowers operating costs

Increases energy heating and cooling efficiency in HVAC systems

Magnetite and dirt separator with (air) deaeration

TTM MAG 110 MA is a magnetite and dirt separator with deaeration with a patented filter insert that effectively separates magnetic and non-magnetic particles.

TTM MAG 110 MA is intended for air deaeration, which removes free air and microbubbles in the system fluid.

Area of use

TTM MAG 110MA  is installed in heating and cooling systems before vital equipment such as boilers, cooling units, heat exchangers etc.

Dimensions:3/4 ″ – 1 ″, 22 CU and 28 CU
Pressure class: PN10
Media temp.:0 – + 110 ° C
Material housing: Brass
Connection:Internal thread and CU-connection
TTM MAG 110 removes magnetic and non-magnetic particles and dirt during continuous operation. When the system fluid passes through the house and the patented insert lowers the speed of the fluid and particles and the dirt collects at the bottom of the separator. A powerful magnetic insert attracts magnetite.
TTM MAG 110 can be connected both vertically or horizontally. The separator should always be installed vertically.

TTM MAG 110 is cleaned simply by removing the magnetic insert (1) and opening the drainage spigot at the bottom (2).

MAG 110 MA

ModelDimensions:Pressure class:TemperatureMaterial (housing):Max flow (max. m/s)Max flow (max. m3/h)Dimensiona (bxhxd mm)
MAG 110 MA 20G3 / 4 ″ inv.PN100 – + 110 ° CBrass1.41.8*139 x 261 x 61510604
MAG 110 MA 2222 CUPN100 – + 110 ° CBrass1.41.6*139 x 261 x 61513186
MAG 110 MA 25G1 ″ inv.PN100 – + 110 ° CBrass1.42.9*139 x 261 x 61510611
MAG 110 MA 2828 CUPN100 – + 110 ° CBrass1.42.6*139 x 261 x 61513193
*) Max flow in standard pipe.

TTM recommends

TTM NoXygen® C650

Automatic vacuum degasser that degasses down to -0.9 bar. Intended for heating and comfort cooling systems.


Large system filter for very dirty system fluids, for temporary or permanent installation.

Simonsland in Borås

When Kanico created a new district in the town of Borås, they chose TTM to supply shunt units for the HVAC systems. The area is called Simonsland and contains 60,000 m2 of buildings.


TTM Energiprodukter was one of the suppliers in the construction of the prestigious Copenhagen Opera House Together with their reseller, the company succeeded in winning the deal and delivering 98 different shunt units.


NCC are building their new head office at Järva Krog in Solna. The new head office has a strategic and easily accessible position adjacent to the E4 motorway.