Separates magnetit and dirt from the system fluid
Lowers operating costs
Increases energy heating and cooling efficiency in HVAC systems
Magnetite and dirt separator
TTM MAG 210 M is a magnetite and dirt separator that effectively separates magnetic and non-magnetic particles from the system fluid. The body is made of painted steel and is delivered with or without insulation.
Area of use
TTM MAG 210 M can be installed in both heating and cooling systems in which particles/dirt occur in the system fluid. In a completely new system, the separator work preventively, which contributes to:
- improved heat transfer
- improved functional reliability of the system
- more efficient maintenance, cleaning and venting
- extended life of the system components.
| Overview | |
|---|---|
| Dimensions: | DN50 – DN150 |
| Pressure class: | PN10 |
| Media temp.: | 0 – +110 °C (uninsulated) 0 – +100 °C (insulated) |
| Material housing: | Steel |
| Connection: | Flanges, according to EN 1092-1 |
| Surface-treated: | Painted |
Magnetite /Air Separator - program
Read more about:
Documentation:
MAG 210 A
Pressure drop diagram
| Model | Connection |
Pressure class |
Temperature °C | Material (housing) | Flow (max. m3/h) | Dimensions (mm) (bxhxd) | Art. no. |
|---|---|---|---|---|---|---|---|
| Without insulation | |||||||
| MAG 210 M 50F | DN 50 Flange | PN10 | 0 – + 110 ° C | Steel | 9.2 | 344 x 535 x 178 | 510628 |
| MAG 210 M 65F | DN 65 Flange | PN10 | 0 – + 110 ° C | Steel | 15.5 | 344 x 535 x 178 | 510635 |
| MAG 210 M 80F | DN 80 Flange | PN10 | 0 – + 110 ° C | Steel | 23.5 | 511 x 675 x 283 | 510642 |
| MAG 210 M 100F | DN 100 Flange | PN10 | 0 – + 110 ° C | Steel | 36.8 | 511 x 675 x 283 | 510659 |
| MAG 210 M 125F | DN 125 Flange | PN10 | 0 – + 110 ° C | Steel | 60.6 | 580 x 785 x 364 | 515494 |
| MAG 210 M 150F | DN 150 Flange | PN10 | 0 – + 110 ° C | Steel | 89.8 | 580 x 785 x 364 | 515500 |
| With insulation | |||||||
| MAG 210 M 50FI | DN 50 Flange | PN10 | 0 – + 100 ° C | Steel | 9.2 | 344 x 535 x 208 | 510666 |
| MAG 210 M 65FI | DN 65 Flange | PN10 | 0 – + 100 ° C | Steel | 15.5 | 344 x 535 x 208 | 510673 |
| MAG 210 M 80FI | DN 80 Flange | PN10 | 0 – + 100 ° C | Steel | 23.5 | 511 x 675 x 313 | 510680 |
| MAG 210 M 100FI | DN 100 Flange | PN10 | 0 – + 100 ° C | Steel | 36.8 | 511 x 675 x 313 | 510697 |
| MAG 210 M 125FI | DN 125 Flange | PN10 | 0 – + 100 ° C | Steel | 60.6 | 580 x 785 x 394 | 515555 |
| MAG 210 M 150FI | DN 150 Flange | PN10 | 0 – + 100 ° C | Steel | 89.8 | 580 x 785 x 394 | 515562 |
TTM MAG 210 M separates magnetic and non-
magnetic particles / dirt during continuous operation. As the system fluid passes through the housing, the flow rate of the liquid is lowered. This causes particles and dirt to accumulate at the bottom of the separator. Two powerful magnetic inserts efficiently attract magnetite.
TTM MAG 210 M can easily be cleaned by
unscrewing the magnet inserts and open the drain tap at the bottom.
TTM NoXygen® C650
Automatic vacuum degasser that degasses down to -0.9 bar. Intended for heating and comfort cooling systems.
TTM MAG 250
Large system filter for very dirty system fluids, for temporary or permanent installation.
Simonsland in Borås
When Kanico created a new district in the town of Borås, they chose TTM to supply shunt units for the HVAC systems. The area is called Simonsland and contains 60,000 m2 of buildings.
TTM Energiprodukter was one of the suppliers in the construction of the prestigious Copenhagen Opera House Together with their reseller, the company succeeded in winning the deal and delivering 98 different shunt units.
NCC are building their new head office at Järva Krog in Solna. The new head office has a strategic and easily accessible position adjacent to the E4 motorway.