Robust hoses up to 15 bar
Threaded connections in brass
Glycol-resistant inner tube in EPDM
TTM Connection hose
Stainless steel braided hose with threaded connections
The TTM Connection hose is a flexible, glycol-resistant hose that meets the stringent requirements set. The EPDM hose is steel-braided and classified for pressures up to 15 bar.
The ends of the connection hose are equipped with connections with an external thread and an internally-threaded brass travelling nut.
Installing the TTM Connection hose
- A shut-off valve should be fitted before each hose
- Fit the hose without applying either a tensile load or torque
- The hose must be mounted one and the same room.
Maintenance
- The connection hose is normally maintenance-free, but should be checked at regular intervals.
| Specification: | |
|---|---|
| Braiding: | Stainless steel wire |
| Inner tube: | EPDM |
| Joint: | Thread ½” – 1” |
| Smooth end: | Brass |
| Packing: | Fibre |
| Maximum permitted working temperature: | +90°C |
| Minimum permitted working temperature: | -5°C |
| Connection ext. /int. | Dimensions | Length (mm) | Max. pressure (bar) | Temperature range | Min. bend radius (mm) | Art. no. |
|---|---|---|---|---|---|---|
| Thread ½” | DN15 | 1500 | 15 | -5°C – +90°C | 45 | 505440 |
| Thread 1” | DN25 | 800 | 15 | -5°C – +90°C | 90 | 508861 |
| Thread 1” | DN25 | 1500 | 15 | -5°C – +90°C | 90 | 503606 |