The market's most compact design
Pre-dimensioned and space-saving
Only one article number is required!
Standardized compact shunt unit for heating
TTM SHUNTOMATIC® MINI is a pre-dimensioned plug-and-play shunt unit with the smallest dimensions on the market. The low weight allows it to be mounted directly in the existing piping, without any wall mounting. TTM SHUNTOMATIC® MINI is equipped with a pressure-independent control valve (PICV), which always provides the correct control, even if the system pressure changes.
Advantages:
- Pre-dimensioned
- Easy to install and space-saving
- Easy to select via the ordering guide
- Dynamic control valve 100% valve authority
- Complete with a pump, control valve and actuator
- Few varieties, easy to select correct shunt unit
- Each shunt unit can be selected with or without communication pump
- Rotatable design
- Available in stock, short time delivery.
Design:
- 6 sizes for heating with heat insulation
- Also available with pump prepared for start, stop and operation indication.
- Correctly rated pump
- Dynamic control valve (PICV)
- Actuator 24V 0-10 V control signal
- Also available with pump prepared for start,
stop and alarm
Shuntomatic® program:
Read more about:
Documentation:
TTM SHUNTOMATIC® MINI has a wide range of applications, for example, the shunt unit can:
- can be installed in direct connection to the ventilation unit for fast regulation
- can control reheating coils in changing rooms in schools, gymnasiums, fitness centres et
- can be used to complement smaller heat pump installations.
- can be used as complement or in new installations to curtain heaters, entrance heaters, fan coils, etc.
TTM SHUNTOMATIC® MINI installation options:
Title | Value |
|---|---|
| Weight appr. kg | 8.5 |
| Max. pressure MPa | 1.0 |
| Temp. range °C | +5 – +110 |
Pump option Standard | |
| Rated current A | 0.44 |
| Power W | 40 |
| Voltage V | 1 x 230 |
Pump option Communication | |
| Rated current A | 1.0 |
| Power W | 100 |
| Voltage V | 1 x 230 |
| Shunt unit Heating | Connection internal (mm) | Flow range | Min. avail. pressure sec (kPa) | Max. loading pressure drop sec (kPa) | Max. effect (kW) at ΔT 30°C | Pump option | Effect (W) | Rate current (A) | Voltage (V) | Download CAD file | Art.no. | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| l/s | l/h | ||||||||||||||||
| min | max | min | max | min | max | min | max | min | max | ||||||||
| V MINI 1 | Ø25 | 0.010 | 0.017 | 35 | 60 | 17.0 | 20.0 | 50 | 47 | 1.2 | 2.1 | Standard | 40 | 0.4 | 1×230 |   |
513360 |
| Communication* | 100 | 1.0 | 1×230 | |
513377 | ||||||||||||
| V MINI 2 | Ø25 | 0.017 | 0.031 | 60 | 110 | 17.0 | 20.0 | 53 | 50 | 2.1 | 3.8 | Standard | 40 | 0.4 | 1×230 | |
513384 |
| Communication* | 100 | 1.0 | 1×230 | |
513391 | ||||||||||||
| V MINI 3 | Ø25 | 0.028 | 0.050 | 100 | 180 | 17.0 | 21.0 | 55 | 52 | 3.5 | 6.3 | Standard | 40 | 0.4 | 1×230 | |
513407 |
| Communication* | 100 | 1.0 | 1×230 | |
513414 | ||||||||||||
| V MINI 4 | Ø25 | 0.050 | 0.106 | 180 | 380 | 18.0 | 22.5 | 45 | 51 | 6.6 | 1.0 | Standard | 40 | 0.4 | 1×230 | |
513421 |
| Communication* | 100 | 1.0 | 1×230 | |
513438 | ||||||||||||
| V MINI 5 | Ø25 | 0.106 | 0.236 | 380 | 850 | 20.0 | 25.5 | 52 | 49 | 13 | 30 | Standard | 40 | 0.4 | 1×230 | |
513445 |
| Communication* | 100 | 1.0 | 1×230 | |
513452 | ||||||||||||
| V MINI 6 | Ø25 | 0.192 | 0.369 | 690 | 1330 | 20.0 | 25.5 | 52 | 49 | 24 | 46 | Standard | 40 | 0.4 | 1×230 | |
513469 |
| Communication* | 100 | 1.0 | 1×230 | |
513476 | ||||||||||||
Floor stands for shunt units
Robust floor stands with small foot-print made of epoxy-coated RHS tubes 50 × 30 mm.
Simonsland in Borås
When Kanico created a new district in the town of Borås, they chose TTM to supply shunt units for the HVAC systems. The area is called Simonsland and contains 60,000 m2 of buildings.
TTM Energiprodukter was one of the suppliers in the construction of the prestigious Copenhagen Opera House Together with their reseller, the company succeeded in winning the deal and delivering 98 different shunt units.
NCC are building their new head office at Järva Krog in Solna. The new head office has a strategic and easily accessible position adjacent to the E4 motorway.