Increases system lifetime
Reduces noise and operational disruption
Protects TTM NoXygen® from dirt/magnetite
TTM MAG 76
Magnetite trap combined with a dirt separator
TTM MAG 76 is effective magnetite trap combined with a dirt separator. The device is primarily designed to be used together with degasser TTM NoXygen®, but can also be used in applications without degassing.
When the gas content in a system fluid drops, magnetite and other deposits often loosen from the system’s interior walls. These cause wear to pumps and pipe walls and may cause clogging of the system.
The recommendation is to install TTM MAG 76 together with NoXygen®. It is especially important to install TTM MAG 76 when it is known that there is magnetite or other particles in the system fluid.
TTM MAG 76 effectively removes magnetite and other particles from the system fluid, which means:
Magnetite clogs valves, etc., and may also cause wet pumps to jam when they are turned off.
Longer service life of the system
Magnetite and other particles have an abrasive effect that may erode the system. Magnetite is magnetic and is attracted to the magnetic fields in pumps where it rubs, for example, on shaft seals, which often leads to leaks.
Protects the degasser
In systems with a high incidence of particles TTM MAG 76 prevents the degassing process from
deteriorating due to clogging of the degasser.
Magnetite / Air Separator program:
Read more about:
|TTM MAG 76||Specifications:|
|Temperature °C||0 – +90°C|
|Material (housing)||Stainless steel|
|Magnetic trap||Magnetic staff|
Replaceable filter cartridge
Nylon filter as standard, mesh size 250 µm (micron).
Article number: u2001217
Note: The thread of the clamping ring must be lubricated with copper paste/silicon grease once a year or every time the filter is opened.
When installed in combination with degasser TTM NoXygen® TTM MAG 76 is connected to the system (½” female. thread) and then fitted directly on the shut-off valve on the inlet to NoXygen.
When connecting to the NoXygen, you start by fitting the supplied compression coupling, and then connect the plain end of the TTM MAG 76 to the compression coupling.
TTM Energiprodukter was one of the suppliers in the construction of the prestigious Copenhagen Opera House Together with their reseller, the company succeeded in winning the deal and delivering 98 different shunt units.
NCC are building their new head office at Järva Krog in Solna. The new head office has a strategic and easily accessible position adjacent to the E4 motorway.