Easy to install,
commission and control

Touch screen interface
and Modbus RTU

Maintains constant operating
pressure in the system

TTM GeniX® GE18

Maintains constant operating pressure in the system

TTM GeniX® is an easy to install and easy to use pressurization unit for heating systems, designed to maintain a constant operating pressure in the system. The unit is designed for permanent installation and is ready to connect.


The TTM GeniX® consists of a digital control unit with touch, sensors and alarm, supplied with an open robust polyethylene expansion vessel with a stainless steel IP rated pressure maintenance pump. The automation for control, regulation and monitoring are connected via Modbus RTU.

TTM GeniX® GE18 is available in various sizes, are easy to place and can be adapted to both small and large heating systems.

Installation benefits:

  • Easy to install, put into operation and operate
  • Can be installed in both smaller and larger heating systems
  • Intuitivt gränssnitt med pekskärm för injustering och övervakning
  • Easy to control with an intuitive touch screen for operation and monitoring
  • Low weight – easy to transport
  • The expansion vessel is available in various sizes.

Operationele voordelen:

  • Keeps the operation pressure constant in the entire heatning system
  • Sensors with alarm connected to deviations, pump, fluid level
  • Noice level under 70db
  • Minimal maintenance is required
  • The automation for control, regulation and monitoring is connected via Modbus-RTU.
Intuitive touch screen. The intuitive 3.5” color touch screen makes the TTM GeniX® GE18 easy to use.

The TTM GeniX® should be installed and used by authorized operating personnel. The pressurization unit is placed in a heated room and connected to the heating system return line (connector G25). Start-up is initiated by connecting the plug to an earthed wall socket (230V, 10A).


The system pressure sensor controls the pressure maintenance pump during filling and a solenoid valve regulates emptying. Pressure maintenance pump location close to the suction side helps to minimise the risk of negative pressure build-up. In this way, a constant operating pressure is maintained in the heating system at both heating and cooling

The pressure sensor in the water-filled expansion vessel displays the current level on the display. If the level in the vessel becomes too low, this is shown on the display with an alarm indication and via alarm relay for external indication.
TTM GeniX® is designed for permanent installation in both new and existing heating systems.

1. Expansion line (Thread 25 mm)
2. Filling pipe (Thread 15 mm)
3. Filling pipe (Thread 15 mm)
4. Level sensor
5. Power cable with plug

 

ModelGE18 110L / 4GE18 200L / 4GE18 300L / 4GE18 500L / 4GE18 110L / 6GE18 200L / 6GE18 300L / 6GE18 500L / 6
Art.no514046514053514060514077514091514107514114514121
Operating pressure (bar)3.03.03.03.06.06.06.06.0
Vessel volume (Litre)110200300500110200300500
Diameter D (Ømm)450520650750450520650750
Height H (mm)10801190113513851080119011351385
Media temp. (°C)+5 – +70+5 – +70+5 – +70+5 – +70+5 – +70+5 – +70+5 – +70+5 – +70
Ambient temp. (°C)+10 – +40+10 – +40+10 – +40+10 – +40+10 – +40+10 – +40+10 – +40+10 – +40
Pressure class (PN)1010101010101010
Allowed liquidsKranvattenKranvattenKranvattenKranvattenKranvattenKranvattenKranvattenKranvatten
Connection dim.G25G25G25G25G25G25G25G25
Electrical data1 ~ 230 V, 50 Hz1 ~ 230 V, 50 Hz1 ~ 230 V, 50 Hz1 ~ 230 V, 50 Hz1 ~ 230 V, 50 Hz1 ~ 230 V, 50 Hz1 ~ 230 V, 50 Hz1 ~ 230 V, 50 Hz
Ext. fuse (A)1010101010101010
Rated power (kW)0.50.50.50.50.50.50.50.5
Voltage (plug)1 ~ 230 V, 50 Hz1 ~ 230 V, 50 Hz1 ~ 230 V, 50 Hz1 ~ 230 V, 50 Hz1 ~ 230 V, 50 Hz1 ~ 230 V, 50 Hz1 ~ 230 V, 50 Hz1 ~ 230 V, 50 Hz
Rated current (A)3.1 – 2.8 A3.1 – 2.8 A3.1 – 2.8 A3.1 – 2.8 A3.1 – 2.8 A3.1 – 2.8 A3.1 – 2.8 A3.1 – 2.8 A
Protection class (IP)5555555555555555
Noise level (dB)under 70under 70under 70under 70under 70under 70under 70under 70
Modbus RTUYesYesYesYesYesYesYesYes
Weight (kg)3434384435353945
Slide
TTM FlexFit connection hose

TTMFlexFit is a glycol-resistant connection hose that is a steel-jacketed EPDM hose rated for pressures up to 10 bar.
TTM Connection hose 1500 DN15
Length: 1,5 m
Art.no: 505440

Slide
Simonsland in Borås

When Kanico created a new district in the town of Borås, they chose TTM to supply shunt units for the HVAC systems. The area is called Simonsland and contains 60,000 m2 of buildings.

Slide
The opera house in Copenhagen

TTM Energiprodukter was one of the suppliers in the construction of the prestigious Copenhagen Opera House Together with their reseller, the company succeeded in winning the deal and delivering 98 different shunt units.

Slide
New office in Solna

NCC are building their new head office at Järva Krog in Solna. The new head office has a strategic and easily accessible position adjacent to the E4 motorway.