Increases system lifetime

Reduces noise and operational disruption

Protects TTM NoXygen® from dirt/magnetite

TTM MAG 54

Effective magnetite and particle filter

TTM MAG 54 is an effective magnetite filter combined with a particle filter. The unit is primarily intended to be installed with the TTM NoXygen® vacuum degasser.

 

When the gas level falls in a heating or cooling system, magnetite and other deposits are often released from the system’s inner walls. The particles contribute to increased wear, including to pumps and pipe walls, and can cause clogging.

 

Installing TTM MAG 54 together with TTM NoXygen® is recommended if it is known that there is magnetite or other particles in the system fluid.

 

Art. no: 514428

Applications


When installed in combination with the TTM NoXygen® pressure relief valve, the TTM MAG 54 is connected to the system (DN15) and then mounted directly on the shut-off valve on the inlet to the TTM NoXygen®

Function


The magnetite is collected using a powerful magnet placed in the bottom of the housing. Particles and dirt are separated from the system fluid through a particle filter consisting of a 300 micron strainer basket, which effectively collects particles and drives them down into a particle trap.

TTM MAG 54:Specification:
Articel nummer:514428
Connection dimensionDN15 (Int./ext.)
Pressure classPN10
Temperature °C-10 – +90°C
Material housingBrass/stainless steel
Collection volume (litre)0.1
Kv value4.96 m3/h
Slide
TTM MAG 54 replacable particle filter

The TTM MAG 54 particle filter is a replacement filter designed for the TTM MAG 54 magnetite and particle filter.

Slide
Simonsland in Borås

When Kanico created a new district in the town of Borås, they chose TTM to supply shunt units for the HVAC systems. The area is called Simonsland and contains 60,000 m2 of buildings.

Slide
The opera house in Copenhagen

TTM Energiprodukter was one of the suppliers in the construction of the prestigious Copenhagen Opera House Together with their reseller, the company succeeded in winning the deal and delivering 98 different shunt units.

Slide
New office in Solna

NCC are building their new head office at Järva Krog in Solna. The new head office has a strategic and easily accessible position adjacent to the E4 motorway.