Cleans heavily soiled systems

Reduces system malfunctions

Protects and enhances
the life of the HVAC system

TTM MAG 250

Large system filter that removes magnetite

Filter equipment TTM MAG 250 with a pump is primarily intended for contract work, and is recommended for systems in which it is known that there is magnetite or other particles in the system fluid. The equipment can also be used for permanent installation.

 

TTM MAG 250 contains a partial stream and does not affect the pressure or flow in the system. As standard, the TTM MAG 250 comes with a filter bag with a mesh size of 1 micron. Other types of filter bags are available on request.

Installation benefits:

  • Easy to install and commission
  • Can be installed for permanent or temporary
    operation
  • Can be installed in both small and large systems.

Operational benefits:

  • Robust design
  • Reduces operating costs
  • Reduces downtime
  • Extends system life
  • Replacement filters in three sizes that are
    easy to replace

Art. no. 506317

Installation

The filter is connected with steel-wound hoses on the system’s return conduit. Two bifurcations with ball valves with minimum dimensions DN20 and a spacing of at least 500 mm are installed on the bottom side of the conduit. The connections on the TTM MAG 250 are DN25 internal thread.


Connect a steel-wound hose (1) from the first bifurcation to the pump (inflow from the system)

Connect a steel-wound hose (2) from the second bifurcation to the filter holder (return to the system).

 

Open both ball valves (3) and wait until all the air in the filter holder has been evacuated through the top filter (4).

 

Start the pump.

 

Inspect the filter regularly and replace as needed. The interval depends on the size of the system and
the quantity of particles in the fluid. We recommend that an inspection be held as early as after a few
days in the event of heavily dirtied systems.

DescriptionSpecification
Art.no.:506317
System pressure standard, total pressure at the connection point, max.10 bar
B x L x H (mm)390 x 450 x 650
Medium temperature0 – + 60 ° C
Pressure classPN 10
Permissible liquidsWater, glycolen, alcoholen
Connection dimensionR25, inv. draad
External fuse10 A
Power rating1 ~ 230 V, 50 Hz
Rated current0,51 kW
Power1 ~ 230V, 50Hz, stekker
Voltage2.34 A
Protection classIP44
Weight20 kg
Slide

Filter bad equipped with lifting handle for easy replacement. The bag filter is available in mesh sizes of 1 microns.

Slide
TTM FlexFit connection hose

TTMFlexFit is a glycol-resistant connection hose that is a steel-jacketed EPDM hose rated for pressures up to 10 bar.
TTM Connection hose 1500 DN15
Length: 1,5 m
Art.no: 505440

Slide
Simonsland in Borås

When Kanico created a new district in the town of Borås, they chose TTM to supply shunt units for the HVAC systems. The area is called Simonsland and contains 60,000 m2 of buildings.

Slide
The opera house in Copenhagen

TTM Energiprodukter was one of the suppliers in the construction of the prestigious Copenhagen Opera House Together with their reseller, the company succeeded in winning the deal and delivering 98 different shunt units.

Slide
New office in Solna

NCC are building their new head office at Järva Krog in Solna. The new head office has a strategic and easily accessible position adjacent to the E4 motorway.