Separates air, magnetit and
dirt from the system fluid

Lowers operating costs

Increases heating and cooling
efficiency in HVAC systems

Air separator

TTM MAG 210 MA is a magnetite, air and dirt separator that effectively separates magnetic and non-magnetic particles, as well as free air and microbubbles from the system fluid. The body is made of painted steel and is delivered with or without insulation.

 

Area of use
TTM MAG 210 MA can be installed in both heating and cooling systems in which particles/dirt and free air/microbubbles occur in the system fluid. In a completely new system, the separator work preventively, which contributes to:

  • improved heat transfer
  • optimized flow in the system
  • improved functional reliability of the system
  • more efficient maintenance, cleaning and venting
  • extended life of the system components.
Overview
Dimensions:DN50 – DN150
Pressure class: PN10
Media temp.:0 – +110 °C (uninsulated)
0 – +100 °C (insulated)
Material housing: Steel
Connection:Flanges, according to EN 1092-1
Surface-treated:Painted
TTM MAG 210 MA separates magnetic and non-magnetic particles / dirt and free air / microbubbles during continuous operation. As the system fluid passes through the housing, the flow rate of the liquid is lowered. This causes particles and dirt to accumulate at the bottom of the separator while free gases are released and accumulated at the top of the separator and released. Two powerful magnetic inserts efficiently attract magnetite.

TTM MAG 210 MA can easily be cleaned by unscrewing the magnet inserts and open the drain tap at the bottom.

MAG 210 MA

Pressure drop diagram
ModelConnection

Pressure

class

Temperature °CMaterial (housing)Flow (max. m3/h)Dimensions (mm) (bxhxd)Art. no.
Without insulation
MAG 210 MA 50FDN 50 FlangePN100 – + 110 ° CSteel9.2344 x 535 x 178510703
MAG 210 MA 65FDN 65 FlangePN100 – + 110 ° CSteel15.5344 x 535 x 178510710
MAG 210 MA 80FDN 80 FlangePN100 – + 110 ° CSteel23.5511 x 675 x 283510802
MAG 210 MA 100FDN 100 FlangePN100 – + 110 ° CSteel36.8511 x 675 x 283510727
MAG 210 MA 125FDN 125 FlangePN100 – + 110 ° CSteel60.6580 x 933 x 364515517
MAG 210 MA 150FDN 150 FlangePN100 – + 110 ° CSteel89.8580 x 933 x 364515524
With insulation
MAG 210 MA 50FIDN 50 FlangePN100 – + 100 ° CSteel9.2344 x 535 x 208510741
MAG 210 MA 65FIDN 65 FlangePN100 – + 100 ° CSteel15.5344 x 535 x 208510758
MAG 210 MA 80FIDN 80 FlangePN100 – + 100 ° CSteel23.5511 x 675 x 313510765
MAG 210 MA 100FIDN 100 FlangePN100 – + 100 ° CSteel36.8511 x 675 x 313510772
MAG 210 MA 125FIDN 125 FlangePN100 – + 100 ° CSteel60.6580 x 933 x 394515597
MAG 210 MA 150FIDN 150 FlangePN100 – + 100 ° CSteel89.8580 x 933 x 394515586

  

Slide
TTM NoXygen® C650

Automatic vacuum degasser that degasses down to -0.9 bar. Intended for heating and comfort cooling systems.

Slide
TTM MAG 250

Large system filter for very dirty system fluids, for temporary or permanent installation.

Slide
Simonsland in Borås

When Kanico created a new district in the town of Borås, they chose TTM to supply shunt units for the HVAC systems. The area is called Simonsland and contains 60,000 m2 of buildings.

Slide
The opera house in Copenhagen

TTM Energiprodukter was one of the suppliers in the construction of the prestigious Copenhagen Opera House Together with their reseller, the company succeeded in winning the deal and delivering 98 different shunt units.

Slide
New office in Solna

NCC are building their new head office at Järva Krog in Solna. The new head office has a strategic and easily accessible position adjacent to the E4 motorway.