Cleans the system fluid from magnetite, air and dirt

Lowers operating costs

Increases energy heating and cooling efficiency in HVAC systems

Magnetite, air and particle separator

TTM MAG 160 MA is a magnetite and dirt separator with a patented particle separator that effectively separates magnetic and non-magnetic particles. The separator also vent the system fluid and removes free air.

Area of use
TTM MAG 160 M is installed in heating and coolingsystems before vital equipment such as boilers, cooling units, heat exchangers etc.

Overview
Dimensions:1 1/4 ″ – 1 1/2″
Pressure class: PN10
Media temp.:0 – + 110 ° C
Material housing: Brass
Material filter insert: PA6
Connection:Internal thread.

TTM MAG 160 MA removes magnetic and non-magnetic particles and dirt from the system fluid in heating and cooling systems, during continuous operation.

As the system fluid passes through the housing, the flow rate of the liquid is lowered. This causes particles and dirt to accumulate at the bottom of the separator while free gases are released and accumulated at the top of the separator and released. Two powerful magnetic inserts attract magnetite efficiently.

TTM MAG 160 MA can only be installed horizontally independent of flow direction.

TTM MAG 160 MA is cleaned simply by removing the magnetic inserts (1) and opening the drainage spigot at the bottom (2).

TTM MAG 160 MA 

ModelDimensions:Pressure class:TemperatureMaterial (housing):Max flow (max. l/s)Max flow (max. m3/h)Dimensions (w x h x d mm)Art.no.
MAG 160 MA 32G 1 1/4 ″ inv.PN100 – + 110 ° CBrass1.45.5*119 x 384 x 77515456
MAG 160 MA 40G 1 1/2 ″ inv.PN100 – + 110 ° CBrass1.47.4*119 x 384 x 77515463

*) Flow at a wall thickness of 2.5 mm.

TTM recommends

Slide
TTM NoXygen® C650

Automatic vacuum degasser that degasses down to -0.9 bar. Intended for heating and comfort cooling systems.

Slide
TTM MAG 250

Large system filter for very dirty system fluids, for temporary or permanent installation.

Slide
Simonsland in Borås

When Kanico created a new district in the town of Borås, they chose TTM to supply shunt units for the HVAC systems. The area is called Simonsland and contains 60,000 m2 of buildings.

Slide
The opera house in Copenhagen

TTM Energiprodukter was one of the suppliers in the construction of the prestigious Copenhagen Opera House Together with their reseller, the company succeeded in winning the deal and delivering 98 different shunt units.

Slide
New office in Solna

NCC are building their new head office at Järva Krog in Solna. The new head office has a strategic and easily accessible position adjacent to the E4 motorway.