Easy to place and sturdy
With overfill containment vessel as option
TTM RTB 61-100
TTM RTB 61-100
Complete mixing vessel – volume 100 litres
Mixing vessel TTM RTB 61 is a complete unit with a fluid vessel, pump and fittings for mixing and topping up fluid in heating and cooling media systems.
The closed fluid vessel is rectangular and has a volume of 100 litres. The vessel is manufactured from rotational cast HD polyethylene and equipped with a screw cap.
The pump housing is made in stainless steel.
TTM RTB 61 mixing vessel is primarily intended for ethylene glycol and propylene glycol mixtures of max. 45.0% and ethanol mixtures of max. 29.9%. Other mixtures of cooling medium and heating medium may require specially designed pumps or fittings. Consult with TTM.
For permanent installations of TTM RTB 61, the vessel must be built-in if flammable liquid will be used in the vessel. Always contact your local fire and environmental authority regarding current provisions for handling your cooling medium.
TTM RTB program:
Read more about:
Wilo WJ 203 X, 1 x 230 V
Supplied with 1.5 m electric cable with earthed plug
Switch for on/off operation
Other pumps can be supplied on request.
2. Shut-off valves
Version with hose screw connection R 1/2”.
4. Non-return valve
5. Bottom valve with strainer
Cooling media based on glycol, primarily ethylene glycol, with associated inhibitors, are classified as hazardous waste and may not be released into the wastewater system.
A. Pump Wilo WJ 203 X, 1×230 V, 5.2 A
B. Shut off valve
C. Non-return valve
D. Bottom valve (non-return valve with strainer)
E. Drain valve
F. Shut off valve
Pipe PEX 15 and 28 mms
1. Fill the vessel with the desired quantity of water.
2. When first started, the pump must be filled with water.
3. Shut off valve F must be closed to the system.
4. Start pump A. Valve B must be open.
5. Top up the desired quantity of glycol and allow the fluids to mix.
6. Open valve F and close valve B. The system fills.
7. After filling is complete, the vessel must be emptied and all
glycol residues flushed from the pump. Close valve F.
|Model||Volume (L)||H mm||Weight (kg)||Art.no:|
|TTM RTB 61-100||100||1015||18||506393|
Dimensions (LxWxH): 440 x 420 x 1015 mm
Pump (standard): Wilo WJ 203 X
Polypropylene and ethylene glycol mixtures: Max. 45.0%
Ethanol mixtures: Max. 29.9%
Electrical connection: Plug
Shut-off valve: D N25
As standard, TTM RTB 61-100 S8 is equipped with pump Wilo TWI 5-308 (for capacity see graph on right, and for data see below). Other alternatives can be provided on request.
Voltage 1×230 V, 50 Hz
Rated current 7.2 A
Rated power P2 1.1 kW
Degree of protection IP44
The pump is equipped with a built-in thermal motor protection with automatic reset.
TTM Energiprodukter was one of the suppliers in the construction of the prestigious Copenhagen Opera House Together with their reseller, the company succeeded in winning the deal and delivering 98 different shunt units.